PRODUCT SPECIFICATION
Digital Pocket Memo 955
Connectivity
• Docking connector: 8-pin female
• USB: Mini USB 2.0 female (full speed, 12 Mbit/s)
• DC in: 6 V
• Microphone: 3.5 mm, impedance 2 kΩ
• Headphone: 3.5 mm, impedance 8 Ω or more
• Memory card: Secure Digital (SD) and Multimedia card (MMC) up to 2 GB
Display
• Type: TFT-Transreflective
• Diagonal screen size: 44 mm / 1.71 in.
• Resolution: 128 × 128 pixels
• Backlight color: white
Recording specifications
• Recording formats:
MP3 (MPEG-1 Audio Layer 3)
Digital Speech Standard / Quality Play (DSS QP)
Digital Speech Standard / Standard Play (DSS SP)
PCM (Pulse-Code Modulation)
• Recording modes / Recording time (with 2 GB):
XHQ (.mp3/two channels) / 36 hours
HQ (.mp3/two channels) / 72 hours
DSS QP (.ds2/mono) / 170 hour
DSS SP: (.dss/mono) / 340 hours
PCM (.wav/two channels) / 3.1 hours
• Compression rate / Sampling frequency:
XHQ: 128 kbit/s / 44.1 kHz
HQ: 64 kbit/s / 32 kHz
DSS QP: 27 kbit/s / 16 kHz
DSS SP: 13.5 kbit/s / 12 kHz
PCM: 1141 kbit/s / 44.1 kHz
• Frequency response (Voice filter mode / Music filter mode):
XHQ: 300 – 8,000 Hz / 50 – 20,000 Hz
HQ: 300 – 8,000 Hz / 50 – 15,500 Hz
DSS QP: 300 – 7,000 Hz / -
DSS SP: 300 – 5,700 Hz / -
PCM: 300 – 8,000 Hz / 50 – 20,000 Hz
Speaker
• Built-in: 30 mm round dynamic speaker
• Output power: 200 mW
Power
• Battery type: two AAA batteries (LR03 or R03)
or two Philips AAA Ni-MH rechargeable batteries
(LFH 9154)
• Battery life (DSS SP mode):
17.5 hours with Philips Ni-MH rechargeable battery
15 hours with Philips alkaline battery
• Charging time (full charge): USB fast charging or power supply: 2.5 hours
USB Docking Station
Connectivity
• Docking connector: 8-pin male
• PC connector: Mini-USB female
• DC in: 6 V
Power
• Power supply: 6 V DC / 850 mA
• Power consumption: 800 mA max.
Interview Microphone
Specifications
• Type: Electret condenser microphone
• Output impedance: approx. 2.2 kOhm @ 1 kHz
• Sensitivity: -42 dBV
• Frequency response: 40 Hz – 18 kHz
• Phantom supply voltage:
1,5 to 5 V/ 0,5mA per channel
• Audio plug: 3.5mm
Conference Microphone 9172
Specifications
• Design: Boundary layer microphone
• Type: Electret condenser microphone
• Output impedance: approx. 2.2 kOhm @ 1 kHz
• Sensitivity: -38 dBV
• Frequency response: 30 Hz – 18 kHz
• Phantom supply voltage: 1,5 to 5 V/ 0,5mA
Connectivity
• Audio plug: 3.5mm
• Audio jack (for cascading): 3.5 mm
• Cable length: 2 m / 6.5 ft.
SpeechExec Pro Dictate
PC requirements
• Minimum: Pentium III, 500 MHz and 256 MB RAM
• Recommended: Pentium IV or similar, 1 GHz and 1 GB RAM
• Hard disk space: 100 MB for SpeechExec, 250 MB
for Microsoft .NET Framework
• Sound card and headphone output or speakers
• 1 free USB port
• Operating system: Windows Vista, Windows XP
(with SP 2), Windows 2000 (with SP 4)